lichang technology (ganzhou) co., ltd.-凯时ks

etfe series
    fluoroplastic raw materials etfe lc301
product type:etfe lc301
introduction:

characteristics: it’s similar to fep, but it hasbetter mechanical property.there are 3 series products with 7 colors available for injection,extrusion and molding.


    parameters

    index name 

    unit

    parameters

    remarks
    lc301
    physical performance
    specific gravity        
    g/cm3 1.73-1.79

    melting flow rate                            
    g/10min 10-25 accept customized

    melting point
    250±10
    mechanical performance
    tensile strength                       
    mpa 28

    breaking extension                          
    % 200

    hardness

    shore hardness
    60

    yield strength
    mpa -

    coefficient of dynamic friction
    —— 0.4
    thermal performance
    maximal temperature of continuous work
    180
    thermal distortion temperature  ℃(1.82mpa 74
     coefficient of linear expansion  (-10-5/℃) 9-9.3
    electrical performance volume resistanc  ω.cm 1017
    insulation breakdown voltage kv(3.2mm thickness) 16
    relative dielectric constant  1khz 2.4-2.6
    dielectric loss angle tangent value  1khz <0.0005

    application fields:it’s widely used in acidresistance and alkali resistance injection products, electric wire, cable,valve lining and spray painting.

    precautions forproduction

    *before production,dryfor 2 hours with temperature 120.

    *the equipment usingthis product must be thoroughly cleaned and any residue shall not be keptinside it.

    *this product is usedfor industrial purposes only.safety is not assured when it is used for otherpurposes.